M21605
12.5G 160x160 Crosspoint
The M21605, M21601 and M21080 are 160x160, 120x120 and 80x80, high-performance, asynchronous fully nonblocking crosspoint switches. They are ideally suited for high-speed data switching in datacom, telecom, Ultra High Definition Video (UHDTV) and 4K 60p definition applications. Each switching path can operate independently at any data rate of up to 12.5 Gbps, allowing for multi-rate routing and switching in one single device. Each input is equipped with a programmable equalizer capable of compensating up to 27 dB of loss at 12.5 Gbps. The output drivers are programmable, with up to 12 dB of post-tap and 5 dB of pre-tap deemphasis. Each lane is individually programmable and can be powered down if not used. The device can be operated from a single 1.8 V supply. The device is configurable through internal registers accessible by a 2-wire serial, 4-wire serial interface or an 8-bit parallel interface.12.5 Gbps 160x160 Asynchronous Crosspoint Switch
Product Specifications
- Part Number
- M21605
- Description
- 12.5G 160x160 Crosspoint
- Max Data Rate(Gbps)
- 12.500
- Number of Channels
- 160
- Embedded CDR
- No
- Power Consumption (W)
- 32
- Package Size
- 45x45mm
Features
- 160x160 non-blocking array crosspoint switch with low power dissipation
- Four integrated temperature sensors with programmable alarm
- JTAG boundary scan
- 1.8, 2.5, and 3.3 V digital core voltages
- 1.8 V core and high-speed I/O voltage
- Auxiliary high-speed input and output for monitoring and testing
- Flexible configuration through standard 2-wire serial, 4-wire serial interfaces or 8-bit parallel interface
- Individual lane LOS (Loss Of Signal) detection and squelch
- Programmable output post tap de-emphasis up to 12 dB total and 5 dB total of pre-tap de-emphasis
- Programmable input equalization to compensate for up to 27 dB of loss at 6.25 GHz
- Low latency, less than 2 ns